FIG. 01 · The platform study
35 mm or 50 mm?
The traveler stays put. So does the camera. Change a lens or sensor and watch what the frame leaves out.
Same viewpoint, different framing. The platform sign and traveler keep the same relative size within both views. The tighter frame shows less of the platform.
Original illustration; centered 3:2 framing simulation. At 2×, the illustration keeps the same shape for comparison rather than simulating the native 4:3 frame edges.
Start with the edges
At 35 mm on full frame, the view leaves room for the station and platform. At 50 mm the traveler takes up more of the picture and the edges draw in. Both the traveler and the building enlarge by the same factor in this simulation. If you stepped closer to fill the frame, their relative size could change. That would be a change of viewpoint.
Try three pairs
- Full frame, 35 and 50. Look at the width of the building in relation to the traveler. Now look at the outer edges.
- 1.5× APS-C, 35 and 50. Those are 52.5 and 75 mm equivalent. A physical 35 mm lens on that sensor lands close to the original 50 mm view.
- 1.5× APS-C, 24 and 35. Those are 36 and 52.5 mm equivalent. This brings you close to the original two frames with real focal lengths you can look for.
Recreate it with your own kit
Find a scene with a foreground subject and something recognizable behind it. Mark the place you stand and keep the camera aimed at the same point. With a zoom, make two exposures from that mark at different focal lengths. Crop the wide image to match the tight one and compare the relative positions. If you only have one usable focal length, make a copy and crop it. For a separate exercise, move physically closer and compare again.
How the simulation works · Translate the frames into a lens choice
